Talking About The Development Trends Of Network Enclosures

Feb 19, 2024 Leave a message

The network cabinets used in the early days were mostly made of castings or angle steels connected or welded into cabinet frames with screws and rivets, and then covered with a cover plate (door) made of thin steel plates. This type of cabinet is bulky, bulky, and has a rough appearance, and has been phased out. With the application of transistors and integrated circuits, as well as the miniaturization of various components and devices, the construction of cabinets is also moving towards miniaturization and building blocks.


The network cabinet has evolved from a whole panel structure to a plug-in box and plug-in structure with a certain size series. The assembly and arrangement of plug-in boxes and plugins can be divided into two categories: hierarchical arrangement and vertical arrangement. Network cabinet data generally uses thin steel plates, steel profiles with various cross-sectional shapes, aluminum profiles, and various engineering plastics.


The framework of the network cabinet is not only connected by welding and screws, but also adopts bonding technology. With the relevant dimensions of the cabinet, check the appearance of the equipment to ensure it matches the selected bracket. A sturdy cabinet can bear a weight of up to 450 pounds, so check the tools used to take out the equipment, such as lifting doors or carts.


A good cabinet is equipped with wheels underneath, so you only need to install the equipment that needs to be installed and then push the cabinet to the appropriate center. Measure the size of the room and the height of the ceiling, doors, and elevator through which the cabinets pass. Furthermore, considering the multiple types of devices inside the cabinet, make sure to place the cabinet in the center near the power supply, network cable jack, and communication jack.